Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure light on the Chevrolet Aveo?

Model: Chevrolet Aveo 310c - Years 2023-2026
Part:

To reset the tire pressure warning light on the Chevrolet Aveo, you need to inflate the tires to the recommended pressure value: the correct value is indicated on the sticker located on the driver's side door pillar. Once the tires have been inflated, you can navigate to the menu that appears on the central display: you will need to select the "Settings" option. At this point, you can scroll through the screen to select the "Reset tire pressure" option: selecting this option will make the warning light disappear.

Posted on 28 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil light on the Chevrolet Aveo
How to reset the oil light on the Chevrolet Aveo
Chevrolet Aveo (2002-2011 / T200, MK 1) If you have just had your Chevrolet Aveo serviced regularly but the corresponding yellow warning light continues to come on steadily then you must ne…
How to reset the service light on a 2009 Chevrolet Aveo
How to reset the service light on a 2009 Chevrolet Aveo
Chevrolet Aveo (2002-2011 / T200, MK 1) In this video, we see how to reset the service light on a 2009 Chevrolet Aveo, MK1: we turn on the instrument panel by turning the ignition key to po…
Chevrolet Aveo warning light reset
Chevrolet Aveo warning light reset
Chevrolet Aveo (2002-2011 / T200, MK 1) Let's see how to reset the oil warning light on a Chevrolet Aveo. We turn on the instrument panel with the key to see the oil warning light. We use t…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos