Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Battery for the Chevrolet Cruze

Model: Chevrolet Cruze D2lc, D2lc-K - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Key

See other generations:
Video tutorial

The information illustrated below will allow you to remove and replace the battery of the key fob for the Chevrolet Cruze. First, take your key fob and start by removing the physical key from inside it; then, use a thin plastic tool to pry open the gap to remove the back cover of the fob, as shown in the video.

At this point, remove and replace the battery with a new one of the correct type (in this case, a CR 2032 3V); insert it the right way round and reassemble the back cover of the fob, along with the key!


Updated on 26 October 2026 by ScegliAuto


Related tutorials

Disassemble the Key of a Chevrolet Cruze
Disassemble the Key of a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Is the battery of your Chevrolet Cruze key flat? Here’s how to open the key to change the battery. Open the metal key of the Cruze remote and, using …
How to Replace the Key Battery in a 2011 Chevrolet Cruze
How to Replace the Key Battery in a 2011 Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Replacing the remote battery in a 2011 Chevrolet Cruze is a simple and quick task that you can do yourself, thanks to our short video. To perform thi…
How to Replace the Remote Battery on Chevrolet Cruze
How to Replace the Remote Battery on Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) To replace the battery inside the remote of your first-generation Chevrolet Cruze, you will need a new CR2032 battery and a small flathead screwdrive…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos