Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Chevrolet Cruze

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Service warning light

See other generations:
Video tutorial

To reset the service of the Chevrolet Cruze, we start by turning on the instrument panel and the car's engine; we press the "menu" button on the lever that controls the turn signals, then we rotate the same lever upwards until the display shows the word "reset" with the oil light symbol, then we press/hold the button at the left end of the turn signal lever until the number "100" appears; at this point the service has been reset and we can turn off the car's engine.

Finally, we can also check if the service has been reset by turning on the instrument panel again and noticing that oil replacement indicators appear.


Posted on 6 January 2025 by ScegliAuto


Related tutorials

How to reset the service light in the Chevrolet Cruze?
How to reset the service light in the Chevrolet Cruze?
Chevrolet Cruze (2009-2015 / J300, MK 1) Resetting the service light in the Chevrolet Cruze, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, ensure …
How to Reset the Service Light on a Chevrolet Cruze?
How to Reset the Service Light on a Chevrolet Cruze?
Chevrolet Cruze (2016-2023 / D2lc, D2lc-K) In this tutorial, you will learn how to reset the service light on a Chevrolet Cruze, a very simple and quick operation to perform only after complet…
How to Reset the Service Light on a Chevrolet Cruze
How to Reset the Service Light on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) To reset the service light on a Chevrolet Cruze, start by turning on the ignition without starting the engine. Press the button at the far left of th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos