Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Chevrolet Cruze

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Service warning light

See other generations:
Video tutorial

To reset the service light on a Chevrolet Cruze, start by turning on the ignition without starting the engine. Press the button at the far left of the left stalk (the one that controls the indicators), then press the "menu" button.

Rotate the dial with the arrows upwards until the message "remaining oil life 0%" appears. Press the same button at the far left of the left stalk, then rotate the dial upwards to highlight "yes". Press the button at the far left of the left stalk to confirm.

The message "remaining oil life 100%" will appear, indicating that the reset has been completed, and you can turn off the ignition.


Updated on 10 July 2026 by ScegliAuto


Related tutorials

How to reset the service light in the Chevrolet Cruze?
How to reset the service light in the Chevrolet Cruze?
Chevrolet Cruze (2009-2015 / J300, MK 1) Resetting the service light in the Chevrolet Cruze, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, ensure …
How to Reset the Service Light on a Chevrolet Cruze?
How to Reset the Service Light on a Chevrolet Cruze?
Chevrolet Cruze (2009-2015 / J300, MK 1) In this tutorial, we will see how to reset the service light on the Chevrolet Cruze, a very simple and quick operation to perform only after completi…
How to Reset the Service on the Chevrolet Cruze?
How to Reset the Service on the Chevrolet Cruze?
Chevrolet Cruze (2009-2015 / J300, MK 1) This tutorial shows how to reset the service on the Chevrolet Cruze, indicated by the "code 82" warning light. Before following this simple and quick…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos