Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil light on a 2016 Chevrolet Spark

Model: Chevrolet Spark MK 1, M300 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Service warning light

See other generations:
Video tutorial

The oil warning light reset on a 2016 Chevrolet Spark car follows simple and quick steps to be carried out independently. To start the reset of the warning light, turn on the instrument panel, then press the Menu button, located on the left lever of the steering wheel.

Use the arrows to set the kilometers to the next oil change and press the SET button for 10 seconds, located at the top of the lever. To complete the reset of the warning light, turn off and on the instrument panel.

Please note that only resetting the warning light does not solve the issue caused by the imminent oil change required by the vehicle.


Posted on 12 February 2025 by ScegliAuto


Related tutorials

How to reset the oil light on the 2020 Chevrolet Spark
How to reset the oil light on the 2020 Chevrolet Spark
Chevrolet Spark (2016-2022 / M400) To reset the oil light on a 2020 Chevrolet Spark vehicle, we need to turn on the dashboard computer of the car and immediately press the menu button,…
How to reset the tire pressure sensor on the 2013 Chevrolet Spark
How to reset the tire pressure sensor on the 2013 Chevrolet Spark
Chevrolet Spark (2009-2016 / MK 1, M300) In the following guide addressed to those of you who own a Chevrolet Spark (year 2013), we will explain the steps you need to take in order to manual…
How to Reset the Service Light on the Chevrolet Spark?
How to Reset the Service Light on the Chevrolet Spark?
Chevrolet Spark (2009-2016 / MK 1, M300) The Service light that appears on the instrument panel of the Chevrolet Spark can be reset by turning on the instrument panel, inserting the ignition…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos