Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front headlight bulb of the Chevrolet Cruze

Model: Chevrolet Cruze D2lc-K, D2lc - Years 2016-2023
Part: Headlight bulb

Today's instructions will allow us to disassemble and replace the headlight bulb of the Chevrolet Cruze. First, we open the hood of the car and start by disconnecting the electrical connector of the bulb, located behind the headlight, by rotating the bulb holder to remove it; we replace the light with a new one, of the correct type and with the same fitting (in this case, a LED light is installed). We then connect the bulb and secure it to the headlight assembly, checking its correct operation; finally, we reassemble the plastic cover.

Posted on 10 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb on a Chevrolet Cruze
How to Replace the Front Headlight Bulb on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) If you want to independently replace the front headlight bulb on your first-generation Chevrolet Cruze (2009-2015) but are unsure how to proceed, pay…
How to replace the headlight bulb of the Chevrolet Cruze
How to replace the headlight bulb of the Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) The first thing to do when the front headlight stops working is to try replacing the bulb. To replace the headlight bulb of the Chevrolet Cruze, we n…
Replacement of the front headlight bulb of the Chevrolet Cruze
Replacement of the front headlight bulb of the Chevrolet Cruze
Chevrolet Cruze (2016-2023 / D2lc-K, D2lc) These short and simple instructions will show us how to disassemble and replace the headlight bulb of the Chevrolet Cruze. First, we open the car's h…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos