Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the manufacturer's emblem on a Chevrolet vehicle.

Model: Chevrolet Chevrolet Various
Part: Manufacturer emblem

Today we will explain the procedure to independently replace the manufacturer's emblem on a Chevrolet vehicle. To carry out this operation, you will need a heat gun, nylon wire, and a sander. Using the heat gun, we heat the emblem to soften the adhesive, allowing us to insert the nylon wire underneath it to remove it from the rear bumper. With the electric sander, we smooth the surface of the bumper where the emblem was located to remove any residue of adhesive and dirt. Finally, we attach the new emblem using adhesive.

Posted on 8 January 2026 by ScegliAuto

Video tutorial

Related tutorials

To know about the timing belt of the Chevrolet/Opel 1.7
To know about the timing belt of the Chevrolet/Opel 1.7
Chevrolet Chevrolet Various In this video we are made aware of some important details about timing belts: first of all, we are pointed out the significant aesthetic difference b…
What does the code "ERROR 89" indicate on Chevrolet vehicles?
What does the code "ERROR 89" indicate on Chevrolet vehicles?
Chevrolet Chevrolet Various The "ERROR 89" code on Chevrolet vehicles is used to indicate a malfunction in the vehicle's thermostat. To resolve this code, it is necessary to rep…
How to reset the service light on a 2005 Chevrolet Truck
How to reset the service light on a 2005 Chevrolet Truck
Chevrolet Chevrolet Various Today, we will explain how to reset the service light on a 2005 Chevrolet Truck. To perform this operation on the pickups, turn on four instruments w…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos