Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Chevrolet Cruze

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Service warning light

See other generations:
Video tutorial

To reset the service light on the Chevrolet Cruze, get in the vehicle and turn on the ignition without starting the engine. Use the button or dial on the steering column to scroll through the menu until you reach the engine oil life option.

Once the oil percentage is displayed, press and hold the confirmation button for a few seconds until the value resets to 100%. When the reset is complete, release the button and turn off the ignition. Turn the ignition back on to check that the maintenance light has been cleared and that the new interval has been recorded correctly.


Posted on 23 March 2026 by ScegliAuto


Related tutorials

How to reset the service light on a Holden/Chevrolet Cruze
How to reset the service light on a Holden/Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Let's see how to reset the warning light on a Holden/Chevrolet Cruze. It's a very simple operation, but the timing and sequence of commands are cruci…
How to Reset the Service Light on a Chevrolet Cruze
How to Reset the Service Light on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Today, we will discover the procedure to reset the service light for the regular maintenance oil change on a Chevrolet Cruze. First, get into the car…
How to Reset the Maintenance Light on a 2015 Chevrolet Cruze
How to Reset the Maintenance Light on a 2015 Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Let's see how to reset the maintenance light on a 2015 Chevrolet Cruze: insert the key into the ignition and turn it to the "ON" position without sta…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos