Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Starter Motor on a Chevrolet Malibu MK6

Model: Chevrolet Malibu MK 6 - Years 2004-2008
Part: Starter motor

Replacing the starter motor on a Chevrolet Malibu MK6 is a challenging task, but feasible for a hobbyist. Access varies depending on the version and engine type, but it is always best to access from underneath. Lift the front, remove the engine cover, and locate the starter motor, which is a cylindrical component with thick cables attached. Disconnect the smaller connector first, followed by the thicker one. Remove the fastening bolts, which are 15 mm, rather long, and difficult to reach. Take out the starter motor, clean the mounting area, and apply dielectric grease to the terminals of the new starter, which you can obtain from eBay with code 266640322760 for £94.54, with free delivery in 2 days. Position the new starter and tighten the bolts with a torque wrench. Reconnect the electrical cables, first the thicker positive one and then the thinner one. Refit the covers, lower the car, reconnect the negative battery cable, and now you can test the system.

Posted on 27 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Chevrolet Malibu (2004-2008 / MK 6) If you own a sixth-generation Chevrolet Malibu and want to learn how to replace the battery inside the key, follow these steps. First, take the key a…
Chevrolet Malibu (2004-2008 / MK 6) To remove a stuck CD from the Chevrolet Malibu radio, press and hold the buttons at the top left and the circular button on the left side simultaneou…
Chevrolet Malibu (2004-2008 / MK 6) In this article, we will see how to reprogram the remote control for the Chevrolet Malibu. To reprogram the key, first turn the key to ON and then to…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos