Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Locate the Fuses in a Chevrolet Equinox

Model: Chevrolet Equinox MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Fuse box

See other generations:
Video tutorial

To locate the fuses in a Chevrolet Equinox, you need to check three main areas. The cabin fuse box is located on the passenger side of the center console, behind the corresponding trim panel.

A second group is found in the engine compartment, inside the fuse box protected by a plastic cover. There is also a box in the trunk area, behind the side panel on the passenger side.

Before performing any checks, turn off the ignition and electrical accessories. Remove the cover of the affected box and consult the assignment diagram to identify the fuse for the circuit to check.

If the element is blown, remove it with the appropriate tweezers and replace it only with a fuse of the same amperage.


Posted on 10 September 2026 by ScegliAuto


Related tutorials

Where are the fuses located in the Chevrolet Equinox?
Where are the fuses located in the Chevrolet Equinox?
Chevrolet Equinox (2010-2017 / MK 2) The fuses in the Chevrolet Equinox are located within the dedicated fuse boxes present in the vehicle. This model has two: one is inside the cabin, o…
How to Locate the Fuse Boxes and Understand Their Schematics in a Chevrolet Equinox
How to Locate the Fuse Boxes and Understand Their Schematics in a Chevrolet Equinox
Chevrolet Equinox (2005-2009 / MK 1) Locating the fuse boxes in a Chevrolet Equinox is quite simple. The first box can be found in the vehicle's cabin, exactly on the passenger side, beh…
What is the fuse diagram for the Chevrolet Equinox?
What is the fuse diagram for the Chevrolet Equinox?
Chevrolet Equinox (2018-2025 / MK 3) In this video, we can see where the fuse boxes of the Chevrolet Equinox are located and what their respective diagrams are, which is useful in case w…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos