Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch Cable on a Chevrolet Matiz

Model: Chevrolet Matiz MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Clutch

Video tutorial

Is the clutch cable on your Chevrolet Matiz due for replacement? Here’s how to do it. Lift the bonnet and secure it, then use a socket spanner to remove the locking pins of the clutch cable. Start by removing the securing pins on either side of the clutch cable.

Once the pins are unscrewed from their housing, remove them. Pull the clutch cable through to the inside of the car under the clutch pedal.

Once the cable is removed, you can install the new one in the engine bay. Screw the securing pins back in place. Adjust the tension accordingly.

Test the clutch operation.


Updated on 16 March 2026 by ScegliAuto


Related tutorials

How to Replace the Clutch on a Chevrolet Matiz 800?
How to Replace the Clutch on a Chevrolet Matiz 800?
Chevrolet Matiz (1998-2010 / MK 1) To replace the clutch on a Chevrolet Matiz, open the bonnet to access the internal components of the engine bay. You will need to remove various obst…
How to Replace the Clutch Cable on a Chevrolet Matiz?
How to Replace the Clutch Cable on a Chevrolet Matiz?
Chevrolet Matiz (1998-2010 / MK 1) To replace the clutch pedal on a Chevrolet Matiz, remove the panel located behind the pedal assembly to access the components at the rear. Here, you …
How to Replace the Rear Wheel Bearing on a Chevrolet Matiz
How to Replace the Rear Wheel Bearing on a Chevrolet Matiz
Chevrolet Matiz (1998-2010 / MK 1) To replace the rear wheel bearing on a Chevrolet Matiz, lift the car so that the wheel fastening bolts can be undone. This will allow the wheel to be…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos