Do it yourself
| ||||
|
Chevrolet Matiz - Video tutorial
Model: Chevrolet Matiz
MK 1
- Years 1998-2010 In order to replace the clutch pedal of the Chevrolet Matiz you have to remove the panel positioned behind the pedal unit, so that you have access to the components in its rear part. Here will be the cable connected to the pedal which will need to be disconnected by loosening the bolt. Once the cable has been released, it will be necessary to open the hood and pull the cable completely from the rear part of the engine compartment, so that it is replaced with a new spare part: this must be connected to the clutch and the corresponding pedal, inserting again also the cover behind the pedal set.
Posted on 7 May 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to open the bonnet of the Volkswagen PoloLet's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.015
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |