Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Spark Plugs on a Spark

Model: Chevrolet Captiva MK 1 - Years 2006-2018
Part: Glow plugs

How do you replace the damaged spark plugs on a Chevrolet Spark? First, lift the bonnet and access the spark plugs. Remove any covers from above the spark plug housing. Disconnect all the leads from the cylinder head, then unscrew the spark plugs and pull them out of the engine block. Take the new spark plugs and guide them into the engine using a socket extension, tighten them, and reconnect the leads to each spark plug. Lower the engine bonnet and test the engine ignition.

Updated on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Spark Plugs on a Chevrolet Captiva
How to Replace the Spark Plugs on a Chevrolet Captiva
Chevrolet Captiva (2006-2018 / MK 1) If you need to replace the spark plugs on this model of vehicle, the following description provides the instructions and procedures for the replaceme…
How to Replace the Manufacturer's Badge on a Chevrolet Captiva
How to Replace the Manufacturer's Badge on a Chevrolet Captiva
Chevrolet Captiva (2006-2018 / MK 1) In today's video, you will see how to remove and replace the badge (just the sticker) of the manufacturer on a first-generation Chevrolet Captiva, fo…
How to Replace the Oil Filter on a Chevrolet Captiva?
How to Replace the Oil Filter on a Chevrolet Captiva?
Chevrolet Captiva (2006-2018 / MK 1) Replacing the oil filter on a Chevrolet Captiva is an extremely simple and quick task. First, remove the upper filler cap to release the pressure in …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos