Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Spark Plugs on a Chevrolet Captiva

Model: Chevrolet Captiva MK 1 - Years 2006-2018
Part: Spark plugs

If you need to replace the spark plugs on this model of vehicle, the following description provides the instructions and procedures for the replacement, and you can also refer to the video. First, open the bonnet and remove the box containing the filter. Then, disconnect the cables connected to the coils before unscrewing the four spark plugs using a socket wrench. After that, screw in the new spark plugs, reconnect the coils, and finally reassemble the box containing the air filter.

Updated on 4 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Chevrolet Captiva (2006-2018 / MK 1) Modify bi-xenon headlights on Captiva. …
Chevrolet Captiva (2006-2018 / MK 1) How do you replace the damaged spark plugs on a Chevrolet Spark? First, lift the bonnet and access the spark plugs. Remove any covers from above the …
Chevrolet Captiva (2006-2018 / MK 1) Before you can start, open the rear tailgate of the boot of your Chevrolet Captiva. Begin by removing the rear lights, simply by unscrewing the fixin…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos