Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Seatbelt from a Chevrolet Cruze

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Checks and maintenance

See other generations:
Video tutorial

Before starting, recline and move the front seat of your Ford Fiesta fully forward. Begin by unscrewing and removing the bolt that secures the lower section of the seatbelt.

Next, repeat this step for the upper section. Once done, unclip and remove the cover of the lower section of the pillar, reaching the seatbelt retractor.

Proceed by unscrewing the bolts and securing clips, then disconnect the relevant electrical connector. Once this step is complete, you will have finished the removal.


Updated on 14 April 2026 by ScegliAuto


Related tutorials

How to Replace the Alternator Belt on a Chevrolet Cruze?
How to Replace the Alternator Belt on a Chevrolet Cruze?
Chevrolet Cruze (2009-2015 / J300, MK 1) In this tutorial, you will see how to replace the alternator belt on a Chevrolet Cruze, a very straightforward task. First, wait for the engine to co…
Removing the Seatbelt Assembly on a Chevrolet Cruze
Removing the Seatbelt Assembly on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) In this video tutorial, you will see how to remove the seatbelt assembly from a Chevrolet Cruze, following these steps. First, open the front door an…
How to Remove the Crankshaft Pulley on the Chevrolet Cruze
How to Remove the Crankshaft Pulley on the Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Today, we will see how to remove and replace the crankshaft pulley on the Chevrolet Cruze by following these simple steps. First, lift the vehicle an…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos