Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Seatbelt Assembly on a Chevrolet Cruze

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015

See other generations:
Video tutorial

In this video tutorial, you will see how to remove the seatbelt assembly from a Chevrolet Cruze, following these steps. First, open the front door and remove the plastic cover on the floor near the seat using a very thin plastic lever; then remove the side plastic cover, also prising it off and unclipping it from the rear clips.

At this point, disconnect the battery terminals and remove the round cover of the seatbelt attachment by unscrewing the screw; all that remains is to remove the pretensioner and take out the seatbelt, as shown in the video!


Updated on 2 May 2026 by ScegliAuto


Related tutorials

Removing the Seatbelt Tensioner on Chevrolet Cruze
Removing the Seatbelt Tensioner on Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Watch this video for instructions on how to remove the seatbelt tensioner on a Chevrolet Cruze. First, get inside the vehicle and undo the bolts secu…
How to Remove the Front Seatbelt from a Chevrolet Cruze
How to Remove the Front Seatbelt from a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Before starting, recline and move the front seat of your Ford Fiesta fully forward. Begin by unscrewing and removing the bolt that secures the lower …
How to Dismantle the Front Seat of a Chevrolet Cruze
How to Dismantle the Front Seat of a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Before you can start, open the front door of your Chevrolet Cruze. Next, move the front seat all the way forward on its tracks. Then, sit in the back…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos