Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Brake Discs on a Matiz

Model: Chevrolet Matiz MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Brake rotors

Video tutorial

Do you want to replace the brake disc on your Matiz? Let’s see how to remove the disc. Lift the vehicle with a jack and remove the wheel.

Unscrew the pins of the brake caliper to detach it from the bracket. Remove the brake pads and unscrew the pins on the brake disc (using a Torx screwdriver), then pull the disc towards you to slide it off the hub. Install the brake disc with all the associated pins, tighten the caliper bracket to the disc and the pads, then refit the brake caliper, ensuring all pins are tightened properly.

Once reassembly is complete, all that’s left is to bleed the brake pump.


Updated on 15 April 2026 by ScegliAuto


Related tutorials

Where are the fuses located on the Chevrolet Matiz?
Where are the fuses located on the Chevrolet Matiz?
Chevrolet Matiz (1998-2010 / MK 1) The fuses for the Chevrolet Matiz are located inside the appropriate fuse boxes within the vehicle: one is in the cabin and the other in the engine c…
Replacing the Bulb in the Rear Light on Matiz
Replacing the Bulb in the Rear Light on Matiz
Chevrolet Matiz (1998-2010 / MK 1) Let’s look at replacing the damaged bulb in a rear light on a Matiz. Remove the rear light to replace the damaged bulb. Lift the tailgate, unscrew (w…
Replacing Brake Pads on Matiz
Replacing Brake Pads on Matiz
Chevrolet Matiz (1998-2010 / MK 1) Is your vehicle not braking well? Let's look at the removal and replacement of the brake pads on a Matiz. Loosen the pins with a telescopic spanner a…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos