Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Antifreeze in a Chevrolet Equinox

Model: Chevrolet Equinox MK 2 - Years 2010-2017
Part: Antifreeze coolant

With the arrival of the coldest season of the year, it is essential to be prepared for extremely low temperatures. In this context, antifreeze plays a crucial role in preserving the engine, and it is important to replace it correctly. The operation is very simple; just follow these steps. Open the hood and locate the fluid reservoir on the driver’s side. Unscrew the cap without removing it completely. Place a bucket or a large container under the engine to collect the used fluid. At this point, pour the new fluid into the reservoir using a small funnel. Screw the cap back on and close the hood.

Updated on 4 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to top up the antifreeze liquid in the Chevrolet Equinox tank
How to top up the antifreeze liquid in the Chevrolet Equinox tank
Chevrolet Equinox (2010-2017 / MK 2) The coolant tank of the Chevrolet Equinox is located inside the front hood on the right side next to the battery and the engine. Before topping up th…
How to Replace the Starter Motor in a Chevrolet Equinox
How to Replace the Starter Motor in a Chevrolet Equinox
Chevrolet Equinox (2010-2017 / MK 2) In this guide, discover how to disassemble and replace the starter motor in a Chevrolet Equinox. First, open the hood of your vehicle and disconnect …
How to replace the starter motor of the Chevrolet Equinox 3.4L V6
How to replace the starter motor of the Chevrolet Equinox 3.4L V6
Chevrolet Equinox (2005-2009 / MK 1) Today we will discover the instructions that will allow us to disassemble and replace the starter motor of the Chevrolet Equinox 3.4L V6. First, we o…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos