Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to top up the antifreeze liquid in the Chevrolet Equinox tank

Model: Chevrolet Equinox MK 2 - Years 2010-2017
Part: Antifreeze coolant

The coolant tank of the Chevrolet Equinox is located inside the front hood on the right side next to the battery and the engine. Before topping up the liquid inside the tank, it is important to make sure that the liquid still present is cold, so this operation should never be carried out with a hot engine. We top up 2-4 liters of liquid inside the tank or until the level reaches the line between minimum and maximum. After completing the operation, we close the front hood and start the engine so that the liquid can circulate.

Posted on 12 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Antifreeze in a Chevrolet Equinox
How to Change the Antifreeze in a Chevrolet Equinox
Chevrolet Equinox (2010-2017 / MK 2) With the arrival of the coldest season of the year, it is essential to be prepared for extremely low temperatures. In this context, antifreeze plays …
How to Replace the Windshield Washer Fluid Reservoir in a Chevrolet Equinox?
How to Replace the Windshield Washer Fluid Reservoir in a Chevrolet Equinox?
Chevrolet Equinox (2010-2017 / MK 2) In this tutorial, you will see how to replace the windshield washer fluid reservoir in a Chevrolet Equinox, a very simple and quick operation. Start …
How to know the fuse diagram of a Chevrolet Equinox
Chevrolet Equinox (2010-2017 / MK 2) In this video tutorial, we are shown the fuse diagrams related to a Chevrolet Equinox car. In relation to the box located inside the engine compartme…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos