Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windshield Washer Fluid Reservoir in a Chevrolet Equinox?

Model: Chevrolet Equinox MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Checks and maintenance

See other generations:
Video tutorial

In this tutorial, you will see how to replace the windshield washer fluid reservoir in a Chevrolet Equinox, a very simple and quick operation. Start by opening the hood, then remove all the plastic rivets and bolts located along the upper edge of the grille.

Next, move underneath the vehicle, unscrew the additional bolts indicated, and proceed with the last screws located inside the wheel well. At this point, you can pull the bumper outward and separate it from the frame.

To remove and replace the reservoir, simply disconnect the various hoses, unscrew the mounting bolts, and follow the reverse procedure.


Updated on 14 September 2026 by ScegliAuto


Related tutorials

How to top up the antifreeze liquid in the Chevrolet Equinox tank
How to top up the antifreeze liquid in the Chevrolet Equinox tank
Chevrolet Equinox (2010-2017 / MK 2) The coolant tank of the Chevrolet Equinox is located inside the front hood on the right side next to the battery and the engine. Before topping up th…
Where is the rear wiper fuse located in the Chevrolet Equinox?
Where is the rear wiper fuse located in the Chevrolet Equinox?
Chevrolet Equinox (2010-2017 / MK 2) If the rear wiper of your Chevrolet Equinox has suddenly stopped working, you can first check the status of the corresponding fuse, the location of w…
How to Replace the Rear Windshield Wiper Blade on a Chevrolet Equinox?
How to Replace the Rear Windshield Wiper Blade on a Chevrolet Equinox?
Chevrolet Equinox (2010-2017 / MK 2) To replace the rear windshield wiper blade on a Chevrolet Equinox, loosen the internal clips that secure the plastic cover along the entire rear wind…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos