Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Oxygen Sensor on a Chevrolet Silverado 2

Model: Chevrolet Silverado MK 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Oxygen sensor

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove and replace the oxygen sensor or lambda sensor on the second generation Chevrolet Silverado, following the instructions below. First, lift the vehicle and locate the oxygen sensor, which is found just after the catalytic converter; then, unscrew the sensor with a socket wrench, disconnecting its wiring to remove it, as shown in the video.

Now, you can replace it with the new one by connecting the electrical cable and hand-tightening it; finally, tighten everything with the wrench!


Updated on 6 May 2026 by ScegliAuto


Related tutorials

How to Replace the Crankshaft Position Sensor in the Chevrolet Silverado Pickup?
How to Replace the Crankshaft Position Sensor in the Chevrolet Silverado Pickup?
Chevrolet Silverado (1998-2007 / MK 1) In this tutorial, you will see how to replace the crankshaft position sensor in the Chevrolet Silverado pickup, a very simple and quick operation. Be…
How to reset the TPMS light on the 2017 Chevrolet Silverado
How to reset the TPMS light on the 2017 Chevrolet Silverado
Chevrolet Silverado (2014-2018 / MK 3) Today we will explain how to reset the tire pressure sensor on a 2017 Chevrolet Silverado vehicle. Press the OK button on the instrument panel until …
How to Replace the Fuel Filter in a Chevrolet Silverado Pickup?
How to Replace the Fuel Filter in a Chevrolet Silverado Pickup?
Chevrolet Silverado (2007-2014 / MK 2) In this tutorial, you will see how to replace the fuel filter in a Chevrolet Silverado pickup, a very simple and quick operation. First, go to the fr…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos