Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Filter in a Chevrolet Silverado Pickup?

Model: Chevrolet Silverado MK 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Diesel fuel filter

See other generations:
Video tutorial

In this tutorial, you will see how to replace the fuel filter in a Chevrolet Silverado pickup, a very simple and quick operation. First, go to the front right wheel, then remove the fender by unscrewing all the related mounting screws.

Next, locate the filter, disconnect the sensor connector, and unscrew the entire housing by gripping it firmly. At this point, you can insert a replacement gasket, transfer the water presence sensor to the new filter, and install it by following the reverse procedure.


Updated on 23 June 2026 by ScegliAuto


Related tutorials

Where is the fuel filter located on the Chevrolet Silverado pickup?
Where is the fuel filter located on the Chevrolet Silverado pickup?
Chevrolet Silverado (2014-2018 / MK 3) In this video, you can see where the fuel filter is located on the Chevrolet Silverado pickup and how to proceed if you need to replace it, a very si…
How to Replace the Fuel Filter in a Chevrolet Silverado Pickup?
How to Replace the Fuel Filter in a Chevrolet Silverado Pickup?
Chevrolet Silverado (2019-2026 / MK 1) .. In this tutorial, you will see how to replace the fuel filter in a Chevrolet Silverado pickup, a very simple and quick operation. First,.. …
Where is the Fuel Pump Relay Located in a Chevrolet Silverado Pickup?
Where is the Fuel Pump Relay Located in a Chevrolet Silverado Pickup?
Chevrolet Silverado (1998-2007 / MK 1) If the fuel pump in your Chevrolet Silverado pickup has suddenly stopped working and the fuses are intact, first check the status of the respective r…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos