Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Seats from a Chevrolet Silverado

Model: Chevrolet Silverado MK 3 - Years 2014-2018
Part: Seat

Today, in this video tutorial, you will learn how to remove the front seats from a Chevrolet Silverado by following these simple and quick steps. First, open the hood and disconnect the battery terminals; then open the front doors and start by unscrewing all the screws found on the seat tracks using a T30 Torx wrench. Once all the screws are removed, disconnect the seat belt pretensioner; also disconnect the electrical connectors located underneath. Now, all that's left is to remove the seat!

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to fold down the rear seats of a Chevrolet Silverado MK3
How to fold down the rear seats of a Chevrolet Silverado MK3
Chevrolet Silverado (2014-2018 / MK 3) In this video, we see how easy it is to fold the rear seats of a Chevrolet Silverado MK3 version, to obtain maximum space behind the front seats, in …
How to Remove the Rear Seats in a Chevrolet Silverado Pickup?
How to Remove the Rear Seats in a Chevrolet Silverado Pickup?
Chevrolet Silverado (2014-2018 / MK 3) In this tutorial, you will see how to remove the rear seats in a Chevrolet Silverado pickup. First, open both rear doors. Next, locate the lever on t…
How to remove the rear seats of the 2019 Chevrolet Silverado
How to remove the rear seats of the 2019 Chevrolet Silverado
Chevrolet Silverado (2019-2026 / MK 1) Today with the help of the following video tutorial, we will show you the steps to remove the rear seats of the 2019 Chevrolet Silverado on your own.…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos