Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Silverado
    4. : How to replace the battery of the Chevrolet Silverado

Chevrolet Silverado - Video tutorial

Model: Chevrolet Silverado MK 2 - Years 2007-2014
Part: Battery
Operation: How to replace the battery of the Chevrolet Silverado

If the battery of your Chevrolet Silverado Mk2 has some serious malfunctioning problems then it is time to replace it completely. To do this, just follow some very simple but at the same time delicate steps. For greater personal safety we recommend wearing rubber gloves. Raise the front hood fully and locate the battery. Unscrew all the safety screws located along the perimeter of the battery and then disconnect the negative pole. Do the same with the positive pole as well and proceed with the removal of the safety bracket. At this point all that remains is to remove the old battery and replace it with the new one. Finally, reassemble the bracket and retighten all the various screws. Connect the two poles and you are done.


Posted on 23 April 2024 by ScegliAuto



How to replace the battery of the Chevrolet Silverado
Chevrolet Silverado (2014-2018 / MK 3) Let's see in this guide the instructions that will allow us to disassemble and replace the battery of the Chevrolet Silverado, in simple and quick st
How do you replace the battery on the Chevrolet Silverado?
Chevrolet Silverado (2014-2018 / MK 3) In order to replace the battery of the Chevrolet Silverado, you need to open the bonnet and access the engine compartment, locating the battery which
Chevrolet Silverado MK3 battery replacement
Chevrolet Silverado (2014-2018 / MK 3) In this video tutorial we will see how to disassemble and replace the battery of the Chevrolet Silverado third series, following the instructions bel

How to activate the cruise control of the Nissan Qashqai

Let's see how the cruise control is activated on the Nissan Qashqai: you have to activate it by putting the cruise control switch to "on", then, using only the right spoke of the steering wheel, press the "set-" button, then the "res +" button also on the right spoke of the steering wheel and the cruise control indicator lights up on the car's instrument panel display. If the brake pedal is pressed while the cruise control is in operation or if the "cancel" button on the right spoke of the steering wheel is pressed, the cruise control will automatically deactivate and the cruise control indicator on the instrument panel will go out.

Watch the video!


by ScegliAuto

More videos