Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fuel pump on a Chevrolet Silverado?

Model: Chevrolet Silverado MK 1 - Years 1998-2007
Part: Fuel pump

To replace the fuel pump on a Chevrolet Silverado, you need to fully lift the truck bed to access the components underneath. Once the bed is raised, you can locate the pump at the top of the fuel tank. Disconnect the connectors and hoses at the top, and by removing the screws, the pump can be extracted. The new pump should then be connected to the hoses and connectors, and secured in its housing with screws.

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How Can I Remove the Fuel Pump from My Chevrolet Silverado?
How Can I Remove the Fuel Pump from My Chevrolet Silverado?
Chevrolet Silverado (1998-2007 / MK 1) To replace the fuel pump in your Chevrolet Silverado, you need to remove the rear part of the vehicle, including the bed. Locate the pump (as shown i…
Where is the fuel pump relay located in the Chevrolet Silverado pick-up?
Where is the fuel pump relay located in the Chevrolet Silverado pick-up?
Chevrolet Silverado (1998-2007 / MK 1) If the fuel pump of our Chevrolet Silverado pickup suddenly stops working and the various fuses are intact, we can first check the status of the resp…
Fuel Filter Replacement for Chevrolet Silverado V8
Fuel Filter Replacement for Chevrolet Silverado V8
Chevrolet Silverado (1998-2007 / MK 1) In this guide, learn how to remove and replace the fuel filter on a Chevrolet Silverado V8 by following the instructions below. First, lift the vehic…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos