Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Brake Shoes of the Chevrolet Colorado

Model: Chevrolet Colorado MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Brake drums and shoes

See other generations:
Video tutorial

Today, in this video tutorial, you will learn how to disassemble and replace the rear brake shoes of the Chevrolet Colorado. First, lift the vehicle and unscrew the bolts securing the rear wheel to remove it; then unscrew all the nuts of the drum, prying at the sides to remove it, as shown in the video.

At this point, remove the brake shoes; to do this, detach the spring from the mechanism and pull the shoes off the pins. Now, clean the braking system and finally install the new rear brake shoes!


Updated on 23 May 2026 by ScegliAuto


Related tutorials

Replacing the Front Brake Pads on the Chevrolet Colorado
Replacing the Front Brake Pads on the Chevrolet Colorado
Chevrolet Colorado (2004-2012 / MK 1) In this guide, follow the main instructions to remove and replace the front brake pads on the Chevrolet Colorado. First, lift the vehicle and start b…
Replacing the Headlights on a Chevrolet Colorado
Replacing the Headlights on a Chevrolet Colorado
Chevrolet Colorado (2004-2012 / MK 1) This guide shows you how to remove and replace the headlights on a Chevrolet Colorado, following the instructions below. First, open the hood of your…
How to Replace the Spark Plugs on a Chevrolet Colorado
How to Replace the Spark Plugs on a Chevrolet Colorado
Chevrolet Colorado (2004-2012 / MK 1) This guide shows you how to remove and replace the spark plugs on a Chevrolet Colorado, following the instructions below. First, open the hood of you…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos