Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs on a Chevrolet Colorado

Model: Chevrolet Colorado MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Spark plugs

See other generations:
Video tutorial

This guide shows you how to remove and replace the spark plugs on a Chevrolet Colorado, following the instructions below. First, open the hood of your vehicle and start by removing the intake hose and the air filter box, unscrewing the screws on the sides with a socket wrench.

Then, disconnect the electrical connectors from the ignition coils, as shown in the video. At this point, use a socket wrench with an extension to unscrew and remove the spark plugs, replacing them with new ones that have the same thread size and heat rating; then reassemble everything!


Updated on 18 June 2026 by ScegliAuto


Related tutorials

How to Replace Spark Plugs on a Chevrolet Colorado
How to Replace Spark Plugs on a Chevrolet Colorado
Chevrolet Colorado (2004-2012 / MK 1) To replace the spark plugs on a Chevrolet Colorado, open the hood to access the components inside the engine bay. Remove the screws securing the air …
How to Replace the Shift Knob on a Chevrolet Colorado?
How to Replace the Shift Knob on a Chevrolet Colorado?
Chevrolet Colorado (2015-2022 / MK 2) To replace the shift knob on a Chevrolet Colorado, start by removing the cup holder from the center console. Once this is removed, pry off the panel …
How to Replace the Battery on a Chevrolet Colorado
How to Replace the Battery on a Chevrolet Colorado
Chevrolet Colorado (2015-2022 / MK 2) This guide shows how to remove and replace the battery on the Chevrolet Colorado, following the instructions below. First, open the hood of your car …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos