Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Shift Knob on a Chevrolet Colorado?

Model: Chevrolet Colorado MK 2 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Shift knob

See other generations:
Video tutorial

To replace the shift knob on a Chevrolet Colorado, start by removing the cup holder from the center console. Once this is removed, pry off the panel that surrounds the shift lever.

After the panel is removed, lift the leather boot of the shifter, releasing the clip inside. This will disconnect the knob from the boot, allowing both pieces to be removed; after removal, install the new pieces and reassemble all other previously removed parts.


Updated on 23 May 2026 by ScegliAuto


Related tutorials

Replacing the Front Brake Pads on the Chevrolet Colorado
Replacing the Front Brake Pads on the Chevrolet Colorado
Chevrolet Colorado (2004-2012 / MK 1) In this guide, follow the main instructions to remove and replace the front brake pads on the Chevrolet Colorado. First, lift the vehicle and start b…
Replace the Exterior Rearview Mirror on the Chevrolet Colorado
Replace the Exterior Rearview Mirror on the Chevrolet Colorado
Chevrolet Colorado (2004-2012 / MK 1) This guide briefly explains how to remove and replace the exterior rearview mirror on the Chevrolet Colorado in simple and quick steps. First, open t…
How to Replace the Air Filter on a Chevrolet Colorado
How to Replace the Air Filter on a Chevrolet Colorado
Chevrolet Colorado (2015-2022 / MK 2) To replace the air filter on a Chevrolet Colorado, open the hood to access the components inside the engine compartment. On the left side of the engi…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos