Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Brake Pads on the Chevrolet Colorado

Model: Chevrolet Colorado MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Brake pads

See other generations:
Video tutorial

In this guide, follow the main instructions to remove and replace the front brake pads on the Chevrolet Colorado. First, lift the vehicle and start by removing the front wheel; then, unscrew the bolts securing the brake caliper, using leverage on the caliper piston to remove it, as shown in the video.

At this point, replace the old brake pads with new ones of the correct type; clean the caliper of dirt and reassemble everything, applying the reverse procedure of disassembly!


Updated on 18 May 2026 by ScegliAuto


Related tutorials

Replacing the Rear Brake Shoes of the Chevrolet Colorado
Replacing the Rear Brake Shoes of the Chevrolet Colorado
Chevrolet Colorado (2004-2012 / MK 1) Today, in this video tutorial, you will learn how to disassemble and replace the rear brake shoes of the Chevrolet Colorado. First, lift the vehicle …
How to replace the headlight bulb of the Chevrolet Colorado 2
How to replace the headlight bulb of the Chevrolet Colorado 2
Chevrolet Colorado (2015-2022 / MK 2) If you are looking for a simple and effective guide that helps you step by step in replacing the headlight bulb of your second generation Chevrolet C…
Replacing the Headlights on a Chevrolet Colorado
Replacing the Headlights on a Chevrolet Colorado
Chevrolet Colorado (2004-2012 / MK 1) This guide shows you how to remove and replace the headlights on a Chevrolet Colorado, following the instructions below. First, open the hood of your…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos