Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Equinox
    4. : How to reset the oil warning light in Chevrolet Equinox?

Chevrolet Equinox - Video tutorial

Model: Chevrolet Equinox MK 3 - Years 2018-2024
Part: Checks and maintenance
Operation: How to reset the oil warning light in Chevrolet Equinox?

In the Chevrolet Equinox the oil warning light can be reset in a few steps directly from the on-board computer menu and using the buttons installed on the right side of the steering wheel. By turning the key to turn on the instrument panel, we can see that a message appears on the display inviting us to have an engine oil change as soon as possible. After doing so, we can reset the warning light, again after turning on the ignition, by pressing the button with the check mark to access the menu and the one with the down arrow to get to the engine oil screen. Keep the check button pressed until the displayed value returns to 100%.


Posted on 11 November 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Equinox 2010-2017 - What does the Chevrolet Equinox TC light mean? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos