Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Headlight Bulb on a Chevrolet Sail

Model: Chevrolet Sail MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Headlight bulb

See other generations:
Video tutorial

Today, let's go through the instructions to remove and replace the headlight bulb on a Chevrolet Sail. First, open the hood of your car and start by disconnecting the electrical connector of the bulb; then remove the rubber protective cap, as shown in the video.

At this point, unclip the metal spring to remove and replace the bulb with a new one that has the same type of base (in this case, H4 type); then insert and install the new bulb correctly, following the video to the end!


Updated on 1 June 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb on a Chevrolet Sail
How to Replace the Headlight Bulb on a Chevrolet Sail
Chevrolet Sail (2014-2023 / MK 3) To replace the headlight bulb on a Chevrolet Sail, open the hood to access the screws that secure the headlight at the top. Remove these screws, alon…
How to Replace the Battery of the Chevrolet Sail?
How to Replace the Battery of the Chevrolet Sail?
Chevrolet Sail (2014-2023 / MK 3) To replace the battery of the Chevrolet Sail, open the hood to access the components inside the engine compartment: the battery is located on the rig…
How to Clean the Radiator on the Chevrolet Sail
How to Clean the Radiator on the Chevrolet Sail
Chevrolet Sail (2014-2023 / MK 3) In this video, you will learn how to clean the radiator on the Chevrolet Sail. Start by removing the front bumper to access the front area and reach …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos