Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on a Chevrolet Sail

Model: Chevrolet Sail MK 3 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Headlight bulb

See other generations:
Video tutorial

To replace the headlight bulb on a Chevrolet Sail, open the hood to access the screws that secure the headlight at the top. Remove these screws, along with those securing the front bumper in the wheel well corresponding to the bulb being replaced. Once these screws are loosened, you can move the bumper and the headlight, detaching the inner cover protecting the bulb.

The bulb should be pulled from its socket and disconnected from the connector to be replaced with a new one.


Updated on 16 May 2026 by ScegliAuto


Related tutorials

How to Change the Headlight Bulb on a Chevrolet Sail
How to Change the Headlight Bulb on a Chevrolet Sail
Chevrolet Sail (2010-2017 / MK 2) Today, let's go through the instructions to remove and replace the headlight bulb on a Chevrolet Sail. First, open the hood of your car and start by …
How to Replace the Water Pump on a Chevrolet Sail?
Chevrolet Sail (2014-2023 / MK 3) To replace the water pump on a Chevrolet Sail, open the hood to access the components on the left side of the engine block. Once you locate the timin…
How to Replace the Shift Boot on a Chevrolet Sail?
How to Replace the Shift Boot on a Chevrolet Sail?
Chevrolet Sail (2014-2023 / MK 3) To replace the shift boot on a Chevrolet Sail, pry at the base of the boot with a tool to release the clips located there. Once the retaining clips a…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos