Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front bumper of the Chevrolet Equinox MK2

Model: Chevrolet Equinox MK 2 - Years 2010-2017
Part: Front bumper

Today we will discover the procedure necessary for the disassembly and replacement of the front bumper of the second series Chevrolet Equinox. First we open the bonnet and we go to disassemble and remove the various plastic clips located above the bumper; the same are found on the lower part of the front bumper and on both sides of the wheel arches, as shown in the video. At this point we unscrew all the screws of the bumper, in order to start unhooking it from the side; then we gently remove our front bumper, following the video tutorial to the end!

Posted on 10 July 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front bumper of Chevrolet Equinox
How to replace the front bumper of Chevrolet Equinox
Chevrolet Equinox (2010-2017 / MK 2) Today we will see, in this video tutorial, the instructions that will allow us to remove and replace the front bumper of the Chevrolet Equinox. First…
How do you remove the front bumper of the Chevrolet Equinox?
How do you remove the front bumper of the Chevrolet Equinox?
Chevrolet Equinox (2005-2009 / MK 1) To be able to remove the front bumper of the Chevrolet Equinox you need to remove the chrome molding which is located halfway up from the front bumpe…
How to replace the headlights of the Chevrolet Equinox
How to replace the headlights of the Chevrolet Equinox
Chevrolet Equinox (2010-2017 / MK 2) Let's see in this short and simple guide how to disassemble and replace the headlights of the Chevrolet Equinox, following the instructions below. Fi…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos