Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper of the Chevrolet Suburban?

Model: Chevrolet Suburban Gmt900 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Front bumper

See other generations:
Video tutorial

To remove the front bumper of the Chevrolet Suburban, loosen the bolts and remove the mounting rivets located inside the wheel wells of the front wheels. After these are removed, unscrew all the bolts at the bottom of the bumper and open the hood to loosen the bolts at the top of the bumper.

This will allow you to disconnect the connectors of the fog lights, so the old bumper can be completely detached. Doing this will enable you to install the new piece, securing and connecting it properly.


Updated on 7 June 2026 by ScegliAuto


Related tutorials

How to Open the Hood of a Chevrolet Suburban?
How to Open the Hood of a Chevrolet Suburban?
Chevrolet Suburban (2015-2020 / Gmtk2yc, Gmtk2yg) In this tutorial, we can see how to open the hood of a Chevrolet Suburban, a very simple operation that does not differ from the typical procedure of…
Where are the fuses located in the Chevrolet Suburban?
Where are the fuses located in the Chevrolet Suburban?
Chevrolet Suburban (2000-2006 / Gmt800) The fuses of the Chevrolet Suburban are located inside the appropriate fuse boxes that are installed on the vehicle: in this type of car, it will be …
What is the Fuse Diagram for the Chevrolet Suburban?
What is the Fuse Diagram for the Chevrolet Suburban?
Chevrolet Suburban (2021-2026 / Gmt1yc) In this video, you can see where the fuse boxes are located in the Chevrolet Suburban and their corresponding diagrams, to refer to in case you need …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos