Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Battery in the Chevrolet Silverado MK3

Model: Chevrolet Silverado MK 3 - Years: 2014, 2015, 2016, 2017, 2018
Part: Battery

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove and replace the battery in the third generation Chevrolet Silverado, following the instructions below. First, open the hood and start by disconnecting the battery terminals; use a 10 mm wrench to loosen the nuts on the positive and negative terminals, as well as the wiring harness bracket located on top. Next, remove the screw for the mounting bracket to lift and extract the battery; then replace it with a new one of the correct type, having the same amperage as the original!


Updated on 8 June 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in a Chevrolet Silverado?
How to Replace the Battery in a Chevrolet Silverado?
Chevrolet Silverado (2014-2018 / MK 3) To replace the battery in a Chevrolet Silverado, open the hood and access the engine compartment, locating the battery directly under the windshield,…
How to Replace the Battery on the Chevrolet Silverado
How to Replace the Battery on the Chevrolet Silverado
Chevrolet Silverado (2014-2018 / MK 3) Let's look at this guide for the instructions to remove and replace the battery on the Chevrolet Silverado in simple and quick steps. First, open the…
How to Replace the Battery in a Chevrolet Silverado Pickup
How to Replace the Battery in a Chevrolet Silverado Pickup
Chevrolet Silverado (2014-2018 / MK 3) In this tutorial, you will see how to replace the battery in a Chevrolet Silverado pickup. Start by opening the hood. Next, move to the passenger sid…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos