Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Door Seal on a Chevrolet Silverado?

Model: Chevrolet Silverado MK 1 - Years 1998-2007
Part: Car door

In this tutorial, see how to replace the door seal on a Chevrolet Silverado. For this simple and quick task, you will need a flathead screwdriver, a utility knife, and of course, the correct replacement part. Start by opening the door you will be working on, then pry off the lower panel using the screwdriver. Grasp the seal and remove it from the edge. Finally, position the replacement, cut it to the correct length, and ensure it stays securely fixed to the edge. Reattach the lower panel.

Updated on 11 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel of the Chevrolet Silverado Mk3
How to Remove the Door Panel of the Chevrolet Silverado Mk3
Chevrolet Silverado (2014-2018 / MK 3) This guide shows how to remove the door panel of the Chevrolet Silverado Mk3. The first step is to remove the trim panels inside the recess of the lo…
How to Replace the Exterior Door Handle on a Chevrolet Silverado MK3
How to Replace the Exterior Door Handle on a Chevrolet Silverado MK3
Chevrolet Silverado (2014-2018 / MK 3) In this video, we will see how to remove and replace the exterior door handle on a third-generation Chevrolet Silverado by following these simple ste…
How to Remove the Door Panel of the Chevrolet Silverado?
How to Remove the Door Panel of the Chevrolet Silverado?
Chevrolet Silverado (2007-2014 / MK 2) To remove the door panel of the Chevrolet Silverado, you need to detach the trim on the armrest and loosen the screws underneath so that it can be re…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos