Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Express
    4. : How to program a new key for the Chevrolet Express?

Chevrolet Express - Video tutorial

Model: Chevrolet Express MK 2 - Years 2003-2023
Part: Key
Operation: How to program a new key for the Chevrolet Express?

It is possible to program a new key for the Chevrolet Express without going to the dealer. In this way we can cut costs and have a perfectly functioning spare key. Let's see how it's done. We insert the key not yet programmed, turn it to the ON position and wait ten and a half minutes, then put it in the OFF position and immediately after it back to on for another ten and a half minutes. Let's do it one more time and then turn the picture off and on again. At this point the key should be programmed, to test it we just have to try to start the engine.


Posted on 4 September 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos