Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Chevrolet
  4. :
  5. Cruze
  6. : How to disassemble and clean the Egr valve of the Chevrolet Cruze 2.0 Diesel

Chevrolet Cruze - Video tutorial

Model: Chevrolet Cruze J300, MK 1 - Years 2009-2015
Part: EGR valve
Operation: How to disassemble and clean the Egr valve of the Chevrolet Cruze 2.0 Diesel

In this video tutorial we will see the main steps that will allow us to disassemble and clean the Egr valve of the Chevrolet Cruze 2.0 Diesel. First of all we open the engine hood and start by removing the plastic cover that we find at the top; then we are going to disconnect the electrical connector of the valve sensor, as shown in the video. Now we use a socket wrench and a torx wrench to unscrew the valve screws, in order to remove it; then we clean it with special degreasers or replace it if it is damaged.


Posted on 5 September 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos