Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Spark
    4. : Where is the EGR valve located in the Chevrolet Spark?

Chevrolet Spark - Video tutorial

Model: Chevrolet Spark MK 1, M300 - Years 2009-2016
Part: EGR valve
Operation: Where is the EGR valve located in the Chevrolet Spark?

In this video, we can see where the EGR valve is located in the Chevrolet Spark and how to proceed in case we need to replace it, a very simple and quick operation. As shown, the valve is positioned in the rear left area of the engine, right behind the throttle body. To access it and subsequently replace it, we first wait for the engine to be completely cold, then we remove the air filter box, the intake manifold, and the throttle body itself. Finally, we disconnect both the tube and the connector connected to the valve, unscrew the respective fixing bolts, and separate it from the engine. To install the replacement, simply follow the reverse procedure.


Posted on 3 October 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Spark 2009-2016 - What is the location of the EGR valve in the Chevrolet Spark 1.2? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos