Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the EGR Valve on the Chevrolet Spark?

Model: Chevrolet Spark MK 1, M300 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: EGR valve

See other generations:
Video tutorial

In this tutorial, you will see how to remove the EGR valve on the Chevrolet Spark, a very simple and quick operation, for example, if you need to clean it. First, ensure the engine is cool enough, then open the bonnet and disconnect the intake manifold.

Next, locate the valve on the left side of the engine, disconnect the sensor connector, undo the two fixing nuts with a 12 mm socket spanner, and separate the valve from the bracket.

To reassemble everything, simply follow the reverse procedure.


Updated on 16 August 2026 by ScegliAuto


Related tutorials

Where is the EGR valve located in the Chevrolet Spark?
Where is the EGR valve located in the Chevrolet Spark?
Chevrolet Spark (2009-2016 / MK 1, M300) In this video, you can see where the EGR valve is located in the Chevrolet Spark and how to proceed if you need to replace it, a very simple and quic…
Guide to Replacing the Timing Belt on a Chevrolet Spark
Guide to Replacing the Timing Belt on a Chevrolet Spark
Chevrolet Spark (2009-2016 / MK 1, M300) This guide provides instructions to dismantle and replace the timing belt on a Chevrolet Spark. First, open the engine bonnet and start by removing t…
How to Replace the Spark Plugs of a Chevrolet Spark
How to Replace the Spark Plugs of a Chevrolet Spark
Chevrolet Spark (2009-2016 / MK 1, M300) Begin by opening the bonnet of your Chevrolet Spark. Next, remove the air filter box by unscrewing the fixing screws and disconnecting the various ho…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos