Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the License Plate Bulb on a Chevrolet Silverado?

Model: Chevrolet Silverado MK 2 - Years 2007-2014
Part: License plate light

To replace the license plate light bulb on a Chevrolet Silverado, access the inside of the bumper to disconnect the connector attached to the bulb. You can then remove the bulb from the outside of the bumper by taking it out of its housing. Once the old bulb is removed, insert a new one from the outside of the bumper and connect it to the connector from the inside. After installation, check that the bulb works correctly and that the license plate is visible.

Updated on 16 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install a LED Reverse Light on Chevrolet Silverado [USA]
How to Install a LED Reverse Light on Chevrolet Silverado [USA]
Chevrolet Silverado (2014-2018 / MK 3) To replace the reverse light bulb on the Chevrolet Silverado, follow these steps: open the tailgate. On the inside of the light assembly, there is a …
How to Replace the Rear Headlight Bulb on a Chevrolet Silverado?
How to Replace the Rear Headlight Bulb on a Chevrolet Silverado?
Chevrolet Silverado (2014-2018 / MK 3) To replace the rear headlight bulb on a Chevrolet Silverado, open the trunk to access the screws that secure the headlight next to it. Once these scr…
How to Replace the Headlight Bulb in a Chevrolet Silverado?
How to Replace the Headlight Bulb in a Chevrolet Silverado?
Chevrolet Silverado (2014-2018 / MK 3) In this video, you can see how to replace the headlight bulb in a Chevrolet Silverado. For the passenger side, first remove the air filter box by uns…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos