Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Equinox
    4. : How to replace the remote control battery of Chevrolet Equinox?

Chevrolet Equinox - Video tutorial

Model: Chevrolet Equinox MK 3 - Years 2018-2024
Part: Key
Operation: How to replace the remote control battery of Chevrolet Equinox?

Replacing the remote control battery of the Chevrolet Equinox is very simple, let's see how to proceed in this tutorial. For this operation we will need a small flat-tip screwdriver and a spare CR2032 battery. Let's start by pressing the small side button in order to extract the emergency key. Next, we pry the screwdriver into the indicated slot and unlock the rear door. At this point we can remove the old battery and insert the spare one, taking care to position it with the positive pole facing down.


Posted on 27 September 2022 by ScegliAuto



How to replace the remote control battery of the Chevrolet Equinox Mk3
Chevrolet Equinox (2018-2024 / MK 3) The guide shows you how to replace the Chevrolet Equinox Mk3 remote control battery. The first operation to perform is to remove the physical key fro
How to replace the remote control battery of Chevrolet Equinox?
Chevrolet Equinox (2010-2017 / MK 2) In this tutorial we can see how to replace the remote control battery of the Chevrolet Equinox, an extremely simple and fast operation. To do this, l
How to open the remote control and replace the battery of the Chevrolet Equinox
Chevrolet Equinox (2005-2009 / MK 1) Following these simple steps, we will see how to open the key remote and replace the battery of the Chevrolet Equinox. First, take the remote in hand

Other guides that may interest you

How to activate the cruise control of the Nissan Qashqai

Let's see how the cruise control is activated on the Nissan Qashqai: you have to activate it by putting the cruise control switch to "on", then, using only the right spoke of the steering wheel, press the "set-" button, then the "res +" button also on the right spoke of the steering wheel and the cruise control indicator lights up on the car's instrument panel display. If the brake pedal is pressed while the cruise control is in operation or if the "cancel" button on the right spoke of the steering wheel is pressed, the cruise control will automatically deactivate and the cruise control indicator on the instrument panel will go out.

Watch the video!


by ScegliAuto

More videos