Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Ignition Cylinder in a Chevrolet Silverado Pickup?

Model: Chevrolet Silverado MK 2 - Years 2007-2014
Part: Checks and maintenance

In this tutorial, you will see how to replace the ignition cylinder in a Chevrolet Silverado pickup, a very simple and quick operation. First, open the hood and disconnect the negative terminal of the battery, then go inside the cabin, unclip the left panel of the dashboard, and unscrew the bolt located inside the parking brake lever. Next, unscrew the mounting screws of the panel and remove the cover from the steering column. At this point, turn the key to the "Start" position, insert a screwdriver into the indicated hole, and remove the cylinder by unlocking the internal clip. Follow the reverse procedure to install the replacement.

Updated on 17 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuel filter located on the Chevrolet Silverado pickup?
Where is the fuel filter located on the Chevrolet Silverado pickup?
Chevrolet Silverado (2014-2018 / MK 3) In this video, you can see where the fuel filter is located on the Chevrolet Silverado pickup and how to proceed if you need to replace it, a very si…
How to Replace the Battery in a Chevrolet Silverado Pickup
How to Replace the Battery in a Chevrolet Silverado Pickup
Chevrolet Silverado (2014-2018 / MK 3) In this tutorial, you will see how to replace the battery in a Chevrolet Silverado pickup. Start by opening the hood. Next, move to the passenger sid…
How to Replace the Fuel Filter in a Chevrolet Silverado Pickup?
How to Replace the Fuel Filter in a Chevrolet Silverado Pickup?
Chevrolet Silverado (2007-2014 / MK 2) In this tutorial, you will see how to replace the fuel filter in a Chevrolet Silverado pickup, a very simple and quick operation. First, go to the fr…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos