Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery on a Chevy Equinox

Model: Chevrolet Equinox MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Key

See other generations:
Video tutorial

If you notice that when you try to open the vehicle with the remote key, the doors do not open, it is likely time to replace the key battery. To do this, follow the instructions below and also refer to the video.

First, pry off the back cover of the key with your fingers; underneath, you will find the battery compartment that you can remove by pressing on it. Then take a new CR 2032 battery, snap it into its compartment, and finally take the back cover and reposition it on the remote.


Updated on 4 July 2026 by ScegliAuto


Related tutorials

How to replace the battery of the Chevrolet Equinox 2 key
How to replace the battery of the Chevrolet Equinox 2 key
Chevrolet Equinox (2010-2017 / MK 2) If you want to find out how you can replace the battery inside the key of your second generation Chevrolet Equinox by yourself, just carefully read t…
How to Replace the Key Battery of the Chevrolet Equinox
How to Replace the Key Battery of the Chevrolet Equinox
Chevrolet Equinox (2018-2025 / MK 3) If you don't know how to replace the button battery in your new Chevrolet Equinox key, don't worry because below you will find all the necessary inst…
How to Replace the Key Battery of the Chevrolet Equinox
How to Replace the Key Battery of the Chevrolet Equinox
Chevrolet Equinox (2010-2017 / MK 2) This guide will show you the steps to replace the dead key battery of your Chevrolet Equinox. You will only need a common flathead screwdriver or a s…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos