Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radio Fuse in a Chevrolet Cruze?

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Fuse box

See other generations:
Video tutorial

To replace the radio fuse in a Chevrolet Cruze, disconnect the cover panel of the fuse box located on the dashboard, to the lower left of the steering column. Once the panel is removed, you can access the underlying fuses: the radio fuse will be the second one from the top on the left, positioned vertically.

You can extract it from its housing using pliers, then insert a new fuse with the same amperage. After replacement, close the panel and check that the radio functions correctly.


Updated on 9 July 2026 by ScegliAuto


Related tutorials

Removing the Radio from a Chevrolet Cruze
Removing the Radio from a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Removing the car radio from a Chevrolet Cruze with associated parts. Remove the covering plastics to access the car radio. Take off the entire centra…
Where is the air conditioning fuse located in the 2012 Chevrolet Cruze?
Where is the air conditioning fuse located in the 2012 Chevrolet Cruze?
Chevrolet Cruze (2009-2015 / J300, MK 1) The air conditioning fuse of the 2012 Chevrolet Cruze is located inside the fuse box in the front hood, specifically next to the battery. To replace …
How to Open the Boot on a Chevrolet Cruze
How to Open the Boot on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) If the boot of your Chevrolet Cruze won't open, there is likely a fault with the boot release fuse. To resolve this issue, access the fuse box locate…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos