|
Do it yourself
| |||
| ||||
How to Change the Engine Oil on a Chevrolet Optra
Model: Chevrolet Optra
MK 1
- Years:
2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Video tutorial
To change the engine oil and the filter on this vehicle, take a look at the images in the video and read the instructions below. First, lift the vehicle and open the hood. Remove the oil filler cap and locate the drain plug at the bottom of the oil pan. Get an oil catch pan and proceed to unscrew the plug. Go back to the top of the engine bay and locate the oil filter, which needs to be unscrewed with the appropriate wrench and replaced with a new one after lubricating and replacing the gasket. Then, close the oil drain plug and fill the system with new oil from the top.
Updated on 13 July 2026 by ScegliAuto
Related tutorials
Chevrolet Optra
(2004-2013 /
MK 1)
In this video, you will learn how to install the two front supports in the hood of the Chevrolet Optra. Not all supports are compatible with the Chev…
Chevrolet Optra
(2004-2013 /
MK 1)
As you can see in this tutorial, replacing the air filter in a Chevrolet Optra is an extremely simple and quick task. Before proceeding, ensure the e…
Chevrolet Optra
(2004-2013 /
MK 1)
Let's look at the information that will help you locate the fuse diagram and positioning for the Chevrolet Optra. First, open the hood of the vehicle…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to Reset the Tyre Pressure Light on the Hyundai i20
These brief instructions will show you how to reset the tyre pressure monitoring system (TPMS) light on the Hyundai i20. Before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get inside the cabin and turn on the ignition. Now, press and hold the TPMS reset button located on the left side of the driver's seat until the tyre pressure light resets on the instrument panel, as shown in the video. At this point, turn off the ignition and start the engine to complete the process! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.054
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |