Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Shell of a Chevrolet Cruze

Model: Chevrolet Cruze MK 1, J300 - Years 2009-2015
Part: Key

In this video tutorial, you will see the main steps to disassemble and replace the key shell or remote of a Chevrolet Cruze. First, take your remote and start by removing the plastic cover and the key from the remote, using something thin to pry at the sides; then remove the circuit board and the transponder, as shown in the video. At this point, install all the components into the new key shell, making sure to follow the reverse order of disassembly, following the video tutorial until the end!

Updated on 15 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Disassemble the Key of a Chevrolet Cruze
Disassemble the Key of a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) Is the battery of your Chevrolet Cruze key flat? Here’s how to open the key to change the battery. Open the metal key of the Cruze remote and, using …
How to replace the key shell of the Chevrolet Cruze
How to replace the key shell of the Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) In this guide, we will see how to repair the key remote by replacing the entire shell of the Chevrolet Cruze. First, take the remote in hand and star…
What DIY Jobs Can Be Done on a Chevrolet Cruze?
What DIY Jobs Can Be Done on a Chevrolet Cruze?
Chevrolet Cruze (2016-2023 / D2lc-K, D2lc) A straightforward DIY job that can be done on a Chevrolet Cruze or any other car is replacing the key/remote battery. Let's get started: remove the e…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos