Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the key shell of the Chevrolet Cruze

Model: Chevrolet Cruze MK 1, J300 - Years 2009-2015
Part: Key

In this guide, we will see how to repair the key remote by replacing the entire shell of the Chevrolet Cruze. First, take the remote in hand and start by removing the physical key, removing the small pin; remove the back cover and the battery, then lever on the side slot of the remote to open it into two parts, as shown in the video. At this point, remove the electronic board, transferring all the components to the new shell or remote; respect the reassembly order and finally verify the correct functioning of the buttons.

Posted on 5 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Shell of a Chevrolet Cruze
How to Replace the Key Shell of a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) In this video tutorial, you will see the main steps to disassemble and replace the key shell or remote of a Chevrolet Cruze. First, take your remote …
How to Replace the Key Battery of the Chevrolet Cruze
How to Replace the Key Battery of the Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) If the key of your first-generation Chevrolet Cruze has suddenly stopped working and you want to know how to replace the dead battery, simply read th…
Disassemble the Key of a Chevrolet Cruze
Disassemble the Key of a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) Is the battery of your Chevrolet Cruze key flat? Here’s how to open the key to change the battery. Open the metal key of the Cruze remote and, using …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos