Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper of the Chevrolet Traverse Mk1

Model: Chevrolet Traverse MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Front bumper

See other generations:
Video tutorial

This guide shows how to remove the front bumper of the Chevrolet Traverse Mk1. After securing the vehicle and opening the hood, remove the 10 plastic clips securing the plastic cover. Remove the six T20 Torx screws on the top of the grille.

At this point, you can lift the vehicle for easier access. Remove the two 7 mm bolts and the T20 Torx screws that hold the wheel wells in place.

Remove the four T20 Torx screws and the two 10 mm bolts at the bottom of the bumper. Pull the bumper to detach the plastic clips and remove the fog light connectors.

Reassembly is done in the same manner as disassembly.


Updated on 15 July 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight on a Chevrolet Traverse
How to Replace the Front Headlight on a Chevrolet Traverse
Chevrolet Traverse (2009-2017 / MK 1) These simple steps will allow you to remove and replace the front headlight on a Chevrolet Traverse. First, open the hood of the vehicle and start re…
How to Replace the Front Wipers on the Chevrolet Traverse
How to Replace the Front Wipers on the Chevrolet Traverse
Chevrolet Traverse (2009-2017 / MK 1) Today, we will provide instructions on how to remove and replace the front wipers on the Chevrolet Traverse in simple and quick steps. First, move to…
How to Replace the Front Windshield Wiper on the Chevrolet Traverse
How to Replace the Front Windshield Wiper on the Chevrolet Traverse
Chevrolet Traverse (2009-2017 / MK 1) If the front windshield wiper on your Chevrolet Traverse Mk1 shows significant signs of wear, it's time to replace it. In this mini guide, you will l…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos