Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter

Model: Chevrolet Aveo MK 1, T200 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Cabin air filter

See other generations:
Video tutorial

The cabin air filter is located on the passenger side, behind the glove compartment: open the glove compartment door, press the sides to retract the rubber stops, unclip the side damper to fully swing the door open and access the air duct; then, open the cap of the cabin air filter housing, remove the old filter, clean any dirt residue, and insert the new filter, ensuring the airflow direction indicated by arrows on the filter is respected.


Updated on 17 February 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Chevrolet Aveo (2002-2011 / MK 1, T200) The cabin air filter is located behind the glove compartment: to replace it, open the glove compartment door, press the sides to retract the end stop…
How to Replace the Spark Plugs on a Chevrolet Aveo Petrol LPG
How to Replace the Spark Plugs on a Chevrolet Aveo Petrol LPG
Chevrolet Aveo (2002-2011 / MK 1, T200) Replacing the spark plugs is one of the easiest maintenance tasks. You don’t need much skill. If you’ve reached the mileage for replacement or notice…
Radiator Replacement Instructions
Radiator Replacement Instructions
Chevrolet Aveo (2002-2011 / MK 1, T200) To remove and replace a damaged radiator, it is advisable to carry out this operation when the engine is cold to avoid unpleasant burns, and first di…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos